Standard:
1.Flange: ANSI, JIS, DIN, HG/T20592-2009, HG/T20615-2009, GB/T9123.1-2000,
GB/T9123.2-2000, GB/T9123.3-2000, GB/T9123.4-2000.
2.Tee:GB/T12459,GB/T13401,ASME B16.9,SH3408,SH3409,HG/T2163,DIN 2615
3.Elbow: JIS B2311,B2312,B2313,B2316
ASME/ANSI
B16.9,B16.25,B16.11,B16.28,ASTM A403
MSS
SP-43,SP-83,SP-97,SP-75
GB 12459,GB/T
13401-2005,GB/T 14383-2005,GB/T10752-1995
SY/T0510-1998,ST5257-91
CSA
Z245.11-05-2005
EN10253-1-1999
EN10253-2-2007 EN10253-3-2008 EN10253-4-2008
DIN2605-1-1992
DIN2605-2-1995
BS1640-1-1962
BS1640-2-1962 BS1640-3-1968 BS1640-4-1968 BS1965-1-1963
GOST17375-2001
AFNOR NF A
49-289-1990 AFNOR NF A 49-170-1-1999 AFNOR NF A 49-170-2-2009 AFNOR NF A
49-170-3-2009 AFNOR NF A 49-170-4-2009 ISO3419-1981 ISO5251- 1981
4.Reducer: ANSI B16.9
5Cap:ASME, JISB, GOST, DIN, GB
No comments:
Post a Comment